Home > Other Fun Stuff > Gadgets & Hacks

ControlTech makes waves in Sirocco aero wheels, unique aero handlebars & more!

6 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

With no shortage of aero road wheels on the market, ControlTech has a unique take on mid-depth profiles. Their new carbon tubeless Sirocco wheels wave up and down 1cm to balance aero performance with weight & crosswind stability. More known for cockpit components, ControlTech also has a new shapely alloy aero dropbar offering the ergonomic benefits of more expensive carbon options; plus, a new clip-on aero extension that attaches to your stem, a uniquely adjustable seatpost, an e-bike system integration, and new aero stem…

ControlTech Sirocco wave-shaped aero carbon wheels

ControlTech Sirocco wave-shaped aero carbon wheelsControlTech’s new aero carbon Sirocco wheels are the latest effort we’ve seen to propose a new approach to aerodynamics. While ControlTech readily admit that the wheels were developed in CFD, not an actual wind tunnel, they say the undulating rim depth works well to produce air movement across the rim more in line with the deepest portion of the rim, with some of the benefits of the softer profile.

The UD carbon rim waves between 35mm and 45mm deep around the wheel, with the higher depth at the paired spokes. Essentially you should get improved aero performance, with only half the weight penalty and half of the extra resistance when riding in crosswinds that would otherwise come with the same step up in depth.

ControlTech Sirocco wave-shaped aero carbon wheelsFor right now the Sirocco wheels are first being offered in a rim brake version with conventional QR axles and 20 front & 24 rear spokes. The rims are specific to each spoke drilling to have spoke pairs pull in the deeper section for increased strength & stiffness. While ControlTech didn’t have any disc brake versions to show, we were told that they are not far behind these wheels.

ControlTech Sirocco wave-shaped aero carbon wheelsThe 35-45mm deep rims measured 17.4mm inside, 23.5mm outside  and use a hooked bead that is said to be tubeless-ready. The wheels use straight-pull, machined alloy hubs and are available in Control Tech’s current 2019 catalog with either Shimano or Campy compatible freehub bodies.

ControlTech Sirocco wave-shaped aero carbon wheels

These pre-production ControlTech Sirocco aero wheels measures 1591g on our scale (745g front, 846g rear) which doesn’t make them incredibly lightweight for this relatively narrow inner width. But Control Tech says they are designed to pair with 25mm tires for the best aero performance. And at $1400 for the set, they offer solid value for a unique aero carbon setup.

ControlTech Cougar Alloy Aero, ergonomic aluminum handlebar

ControlTech Control Tech aero aerodynamic affordable aluminum cockpit componentsAt first glance of the new aerodynamic & affordable aluminum Cougar Alloy Aero handlebar, you’d be excused for mistaking it for carbon. ControlTech takes advantage of more advanced aluminum manufacturing techniques to combine aerodynamic and ergonomic profiles, plus internal cable routing.

ControlTech Control Tech aero aerodynamic affordable aluminum cockpit componentsThe bar joins two other in the Cougar road family that each share the same compact 75mm reach & 125mm drop, plus varying degrees of aero/ergo shaping. The standard Cougar Alloy (top) is mostly round, then both the Cougar Alloy Aero (middle) and Cougar Carbon (bottom) add indentations at the bends on the top, plus wide flat aero tops.

ControlTech Control Tech aero aerodynamic affordable aluminum cockpit componentsQuite unique for an alloy bar, the new forged Cougar Alloy Aero features internal routing channels, plus full Di2 compatibility.

ControlTech Control Tech aero aerodynamic affordable aluminum cockpit componentsIt has a 100mm wide, 31.8 clamping surface to work with almost any aero stem, plus room for an out-front GPS mount.

ControlTech Control Tech aero aerodynamic affordable aluminum cockpit componentsThe $130 alloy bar comes in 40, 42 & 44cm widths, and features a gentle 4° outward flare at the drops for added comfort & clearance. You can’t see it because I am holding the bar here, but it features a subtle triangular shape here in the drop which makes it comfortable in my hand without any pressure spots, making it easy to have a secure grip without squeezing tight.

ControlTech Control Tech aero aerodynamic affordable aluminum cockpit components

Looking at the bars on our scale, the $330 Cougar Carbon Aero handlebar is the lightest at 240g of course. This new Cougar Alloy Aero handlebar does add quite a bit of weight at 377g, but with more advanced shaping than probably any other $130 bar. The more simple & cheap $75 Cougar Alloy round handlebar still offers a bit of oval shaping on the tops & triangular profiled drops.

Sirocco Aero Bar with unique clip-on attachment

ControlTech Control Tech aero aerodynamic affordable aluminum cockpit componentsThe new carbon Sirocco clip-on aero bar uses a new short, compact, and upright shape that will likely make it a good fit for riders looking to get aero with a new hand position, but not at the expense of comfort. But what is most interesting about the new aero bar is the modular clip-on system that allows riders to mount it to either the stem or conventionally to the bar.

ControlTech Control Tech aero aerodynamic affordable aluminum cockpit componentsThe way it attaches to the stem is with a special U or D-shaped bracket that mounts around the body of your stem. ControlTech says they will offer mounts for their stems, but also for common stems from other manufacturers. A rubber insert in the bracket allows a secure fit to your stem, then tightened in place with four bolts. I levered on the one they had set up with their stem and did not feel any flex, but suspect you’ll have to be super careful if using any non-ControlTech stem.

ControlTech Control Tech aero aerodynamic affordable aluminum cockpit componentsSo why attach to the stem anyway? One reason is the possibility for more fore-aft stiffness, plus you will likely be clamping to an alloy stem vs. a carbon basebar. As a clip on option, some aero drop handlebars also don’t have a lot of extra clamping area (see those Cougar bars above), so this could offer an option where no other is possible. But the biggest selling point in our book is just flexibility. The new stem-mount system also works with the two standard bar clamps, so you can pick whichever works for you, and the extra position may allow a shorter (less stretched forward) fit for those looking to fine-tune their aero position on the bike.

ControlTech Control Tech aero aerodynamic affordable aluminum cockpit components

In addition to the new carbon Sirocco aero bar shape (left), ControlTech also showed us a 3D printed prototype of an aluminum version. So the new modular stem-mount setup will also be offered in their affordable alloy clip-on aerobar as well, also with more fore-aft adjustability.

Hex adjustable offset seatpost

ControlTech Control Tech aero aerodynamic affordable aluminum cockpit componentsLooking to simplify the number of products needed to dial in that perfect fit, ControlTech’s Hex seatpost design gives you 0, 5, 10 & 20mm of saddle offset in a single seatpost.

ControlTech Control Tech aero aerodynamic affordable aluminum cockpit components

The way it works is simple, by removing the seat guts, the Hex can be rotated & flipped around to the desired setback. Once in place, a small setscrew in the top of the head keeps it from moving around, and clamping the saddle secures everything in place. Of course changing the setback will also require readjusting your saddle height as well. But it shouldn’t be something you would need to do regular, possibly just if you change saddles or get an updated bike fit.

ControlTech Control Tech aero aerodynamic affordable aluminum cockpit components

The design is available in either this 252g Cougar Carbon Hex seatpost for $260, or a more affordable Falcon Alloy Hex seatpost for $120.

Bosch e-bike integration

ControlTech Control Tech aero aerodynamic affordable aluminum cockpit componentsBosch e-bikes have a new integrated HMI control computer option, so e-bike component makers have been scrambling to make new solutions vs. the mess most e-bikes deal with mow. ControlTech has a few projects in development, including an adjustable angle stem (left rear), a 3D print of what will be a separate alloy stem cap mount (middle right), and a third stem cap mount that will use a Garmin style mount (left front) like new e-bike control unit computers coming from Shimano in the near future.

Falcon aero alloy stem & spacers

ControlTech Control Tech aero aerodynamic affordable aluminum cockpit componentsLastly from the interesting new 2019 Control Tech components is a clean looking, semi-aero aluminum stem. The 6061 Falcon Aero Stem gets a boxy, dropped shape (that works with the new clip-on), plus a smoothly integrated stem cap. It comes only in -8°, and 80-120mm lengths.

ControlTechBikes.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

6 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Maus Haus
Maus Haus
4 years ago

Control Tech has a good designer(s) it appears. Vision 4D Aerobar is $429/267g. CT Cougar (roar) Carbon Aeroar $330/240g. Save $100 and lighter… bam

Gears4Good
4 years ago

I wonder how Campagnolo is going to feel about that wheel. It’s just missing one “c” in the name.

Greg
Greg
4 years ago

Stop calling things unique. That word does not mean what you think it means.

Hexsense
Hexsense
4 years ago

When they say bar size is 38cm, is it measured at the hood and then drop bar flared out to 39.5.
Or it measured at 38 in the drop so the hood is actually 37.5-ish? And is it mid to mid or end to end?
This infor is critical for me who want bar no wider than 38cm mid to mid.

Velo Kitty
Velo Kitty
4 years ago
Reply to  Hexsense

I think most manufacturers now quote sizes based on the tube center-to-center measurement on the top of the bar, near the hoods. But there are no rules, and the measurements aren’t always exact. I know some manufacturers quoted based on outside-to-outside before, but have now switched to center-to-center.

RED
RED
4 years ago

Kudos to the ControlTech engineers, but…

Cougar? Really???

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.