Home > Event Coverage > Bespoked

Ingrid Shifter Completes 1x 12-speed MTB Drivetrain, Made-in-Italy for Bespoked

Ingrid MTB Trigger Shifter prototype and complete alternative 12-speed mechanical mountain bike groupset, made-in-Italy
7 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

We’ve ogled Ingrid’s Italian CNC-machined components for years – but their alternative mountain bike drivetrain has been of particular interest, and this new shifter takes it to the next level. Paired to their own RD1 mechanical rear derailleur and wide range 12-speed cassettes, you’ll soon be able to ride a premium mountain bike gruppo made entirely in Italy…

Ingrid MTB Trigger Shifter prototype machined & 3D-printed

Ingrid MTB Trigger Shifter prototype and complete alternative 12-speed mechanical mountain bike groupset, made-in-Italy, on a Sour Crumble hardtail
complete Sour bike photo c. Ingrid

What more to say than that Ingrid says they’ve finally solved their alternative MTB Trigger Shifter project?

Designed to offer a viable high-performance mechanical shift alternative to the big drivetrain makers, the Ingrid MTB Trigger Shifter is made in Italy just like all of their other drivetrain components. And it’s just as modular and serviceable. It is also still a combination of CNC-machined 7075 alloy and 3D-printed PA12 plastic, rotating on an in-house machined bushing and offering tons of adjustability.

Simply push the paddle to downshift. Pull back to release from the other side to upshift.

Ingrid MTB Trigger Shifter prototype & 12-speed mechanical rear derailleur, mountain bike groupset is made-in-Italy
all photos by Cory Benson, c. Bikerumor

Mounting is with a standard band clamp or MatchMaker direct mount. The shift lever angle is fully adjustable. And the end of the trigger can be replaced with a different shape paddle. The large black PA12 cylinder hold the shift ratchet inside. At first, Ingrid will offer the MTB Trigger Shifter with 12-speed compatibility to work with their RD1 derailleur (SRAM Eagle gear spacing). But other options are inevitable. 11 & 13-speed come to mind next.

New CRS MTB crankset protector, too

Ingrid alternative 12-speed mechanical mountain bike groupset, made-in-Italy, new CRS-crankset protector

Another nice little new detail, Ingrid has added an anti-scuff protector option for their cranks. Seen here on their heavy-duty, CRS-G2 MTB crankset, the protector is made of the same plastic as their crank boots protectors. The new anti-scuff guards are simply stuck in place with a durable double-sided adhesive, and continue the machined lines aesthetic of the crank arm underneath.

Get them soon to protect all Ingrid CRS cranks.

Ingrid Dropbar Gravel & 1x Road shifters, too.

Ingrid 1x Dropbar Shifter prototype, complete alternative 12-speed mechanical gravel road bike groupset, made-in-Italy

Less further along in development are dropbar levers, too. But prototypes do now officially exist.

These were not working prototypes like the MTB shifters, so I could only get a feel for the shape of the hood, body, and angular lever at this point in development. They aren’t especially slim, but felt good in hand – even that long straight lever blade.

Of course, these are much more complicated, hiding a new brake master cylinder inside there, as well. Ingrid did say that the shift mechanics will be essentially the same as the MTB shifter. That means 12-speed compatibility at first, but 11 & 13sp possibilities, too.

Ingrid MTB shifter & groupset – Pricing & ultimate availability

Ingrid MTB Trigger Shifter prototype and complete alternative 12-speed mechanical mountain bike groupset, made-in-Italy

Ingrid was reluctant to put a price on their new shifter just yet, but was happy to let me guess how much it would probably cost. That led to me optimistically lowballing them to try to see when their eyes perked up. We stopped virtually haggling somewhere north of 200€. That would make this about the most expensive single mechanical shifter on the market. But don’t forget, it’s totally made in Italy, and pairs with a 600€ mechanical derailleur. Plus, in the days of electronic drivetrains, it’s still cheaper that most AXS kit.

As for when you’ll be able to buy it? Soon. Officially, these are almost ready for production. So we expect you’ll be able to buy them at the start of next year. The road levers though, will have to wait at least another half year, we think.

Ingrid.bike

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

7 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Atakua
Atakua
3 months ago

These look sexy, but man I am broke!

Korey
Korey
3 months ago

Look amazing, but my thoughts always to go support. Probably probably going to be a pain in most cases, with wait times.

it's_jake
it's_jake
3 months ago

what is the planned shifting mechanics for the drop bar lever? double tap style? i only see one paddle which is also the brake lever

Cristóvão Manuel Agostinho de Sousa Morgado
Cristóvão Manuel Agostinho de Sousa Morgado
3 months ago

Strange I’ve seen the derailler on Aliexpress all the time.

Jeff
Jeff
3 months ago

OK , but is it any better? Why would I ever choose this other than pose-factor?

John
John
3 months ago
Reply to  Jeff

Because you like the design yourself?

Henry
Henry
3 months ago

I don’t get it. How do you pull back on the lever?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.